Lennox SLP98UHV Error Code E 295: Indoor Blower Motor Over Temperature
What Does Code E 295 Mean?
Error code E295 on the Lennox SLP98UHV indicates that the indoor blower motor temperature has exceeded its safe operating limit, triggering the motor's internal thermal protection device. The motor has shut itself down to prevent permanent damage.
Blower motor overheating is typically caused by failing bearings. As bearings wear, friction increases, generating excess heat and drawing more electrical current. The motor's built-in thermal protector (a temperature-sensitive switch inside the motor) opens the circuit when the motor gets too hot, shutting it down. Once the motor cools, the thermal protector may reset, only for the cycle to repeat.
A technician should check the blower motor's amp draw and compare it to the nameplate rating. If the motor is drawing excessive amps, the bearings are likely failing and the motor needs replacement. The technician should also verify there are no external causes of overheating, such as a severely clogged filter or blocked ductwork that forces the motor to work harder than normal.
Common Causes
| Cause | Likelihood | DIY? |
|---|---|---|
| Blower motor bearings failing, causing overheating | Most common | ✗ Call a pro → |
When to Call a Professional
Contact a licensed HVAC technician if:
- The furnace shuts down intermittently with E295 and restarts on its own after cooling
- The blower motor is hot to the touch or smells like burning
- The blower motor makes grinding or squealing noises before shutting down
✓ Verified against manufacturer service manual — March 2026