Ruud UGPH-07EAMGR Furnace Error Codes

Single Stage Gas Furnace | Control Board: UTEC 1012-925

Not your model? View all Ruud models →

Disclaimer
This information is for reference purposes only and does not guarantee accuracy or completeness. Always consult your owner's manual and a licensed HVAC technician for diagnosis and repair. Any actions taken based on this information are at your own risk.

All Error Codes

Code Name Severity DIY?
1 Blink (2-sec pause) 1 Hour Lockout High ✗ Call a pro →
2 Blinks (2-sec pause) Pressure Switch Is Open High ✗ Call a pro →
3 Blinks (2-sec pause) Limit Switch Is Open High ✓ Yes →
4 Blinks (2-sec pause) Pressure Switch Shorted High ✗ Call a pro →
LED Off No Power to Control Board High ✓ Yes →
LED Steady On Normal Operation Info — →
Flame LED Rapid Blink Flame Sense Issue High ✗ Call a pro →
Flame LED Slow Blink Marginal Flame Sense Current Low ✓ Yes →

How to Read the Error Code

The "OK" LED on the Integrated Furnace Control (IFC) UTEC 1012-925 blinks to indicate external faults. The number of blinks followed by a 2-second pause identifies the fault condition. A separate amber flame sense LED indicates flame current status: steady on for good current, flashing for marginal current.

About This Model

The Ruud UGPH-07EAMGR is a single stage gas furnace using the UTEC 1012-925 control board.